Friday, December 31, 2010
Friday, December 3, 2010
New Toyota Trucks Toyota Tundra
Friday, November 26, 2010
Volcano
volcanic erruption

Due to Volcanic Ash has sharp edges, then you should
cleaning the vehicle is done by spraying all parts of the exterior
vehicle with water as the initial stages, until the glue Volcanic Ash
on the exterior body parts can be separated by water pressure. It is intended that
Volcanic dust that attaches to the exterior of vehicles can be separated without
make beret exterior vehicle parts.
Perform cleaning in detail such areas and the bottom of the vehicle wiper
As a final stage, water spray throughout the vehicle to clean up
car shampoo is attached.
To determine whether the component is done cleaning or
necessary, replacement, we recommend to contact the official Workshop
us for further examination to determine and ensure that dust
not to get into the engine air duct.
We strongly recommend that after cleaning and inspection
detail in areas of brakes for optimum braking performance.
Before running make sure the first vehicle in its best condition. As
air filters, drive belts, wiper rubber does need cleaning or replacement
first so as not to damage the vehicle, however for
sure, we recommend to contact our authorized workshops for
further examination.
Important component of what it must be replaced or cleaned as
Volcanic Dust exposed to vehicle performance still excellent?
- Air Cleaner, Drive belt and idler bearings, brake components, grille and radiator grille
AC condenser, AC in the cabin filter detailed investigation by
Official Workshops
The bottom of the vehicle needs to be cleaned from dust to prevent the former ex-
rust in the future such as: exhaust, lower arm (the legs), chassis, etc..
Maintenance vehicles are still in need during Volcanic Ash still exist at the location
operate vehicles, check and clean the air filter, drive belts, wiper, lattice
lattice radiator, AC condenser and cabin air conditioning filter [water purifier] once a week (or
can be more rapid if the condition is severe enough dust) to keep the vehicle fixed
prime. Next close the vehicle after the wash to avoid
Volcanic dust again.

It should be known in advance that Volcanic Ash containing silica materials
lead acid that are sharp and corrosive, so if the cleaning process
inappropriate vehicle, it will cause scratches on the vehicle body area,
glass can also damage the brake components and other vehicle parts.
lead acid that are sharp and corrosive, so if the cleaning process
inappropriate vehicle, it will cause scratches on the vehicle body area,
glass can also damage the brake components and other vehicle parts.
Due to Volcanic Ash has sharp edges, then you should
cleaning the vehicle is done by spraying all parts of the exterior
vehicle with water as the initial stages, until the glue Volcanic Ash
on the exterior body parts can be separated by water pressure. It is intended that
Volcanic dust that attaches to the exterior of vehicles can be separated without
make beret exterior vehicle parts.
The next stage is to perform cleaning on the body and glass
vehicle using a soft cloth, where cleaning can
performed using car shampoo for more maximum results.
Please note, if the area still feels rough due to glass
Volcanic Ash is still there, you should refrain from the process and do pengelapan
cleaning again by spraying more water on the area
rough or in conjunction with spraying at her.
vehicle using a soft cloth, where cleaning can
performed using car shampoo for more maximum results.
Please note, if the area still feels rough due to glass
Volcanic Ash is still there, you should refrain from the process and do pengelapan
cleaning again by spraying more water on the area
rough or in conjunction with spraying at her.
Note: Check the cloth regularly to make sure no dust
left on the cloth, which can damage the paint surface. If necessary clean cloth
before the next cleaning process.
left on the cloth, which can damage the paint surface. If necessary clean cloth
before the next cleaning process.
Perform cleaning in detail such areas and the bottom of the vehicle wiper
As a final stage, water spray throughout the vehicle to clean up
car shampoo is attached.
To determine whether the component is done cleaning or
necessary, replacement, we recommend to contact the official Workshop
us for further examination to determine and ensure that dust
not to get into the engine air duct.
We strongly recommend that after cleaning and inspection
detail in areas of brakes for optimum braking performance.
Before running make sure the first vehicle in its best condition. As
air filters, drive belts, wiper rubber does need cleaning or replacement
first so as not to damage the vehicle, however for
sure, we recommend to contact our authorized workshops for
further examination.
Important component of what it must be replaced or cleaned as
Volcanic Dust exposed to vehicle performance still excellent?
- Air Cleaner, Drive belt and idler bearings, brake components, grille and radiator grille
AC condenser, AC in the cabin filter detailed investigation by
Official Workshops
The bottom of the vehicle needs to be cleaned from dust to prevent the former ex-
rust in the future such as: exhaust, lower arm (the legs), chassis, etc..
Maintenance vehicles are still in need during Volcanic Ash still exist at the location
operate vehicles, check and clean the air filter, drive belts, wiper, lattice
lattice radiator, AC condenser and cabin air conditioning filter [water purifier] once a week (or
can be more rapid if the condition is severe enough dust) to keep the vehicle fixed
prime. Next close the vehicle after the wash to avoid
Volcanic dust again.
Tuesday, November 23, 2010
Mitsubishi Trucks Mitsubishi Raider
Friday, November 5, 2010
Peugeot EX1 Modification Car
On the eve of the of the Paris Motor Show, Peugeot held a private viewing of the EX1 Concept Car at its premier showroom on the Champs Elysees in Paris. The EX1 represents one of Peugeot’s celebrations of 200 years of business, along with the company’s new corporate mantra, “Motion and Emotion”. The EX1 concept proves that an electric powered car does not need to be only a neighbourhood local commuter car, but also an exciting, efficient, and high speed mode of transport.
Its name stands for: E = Electric, X = across four wheels, and 1 = the No. 1 vehicle of its type. The front of the car is charged with smoothing the airflow over its tapered rear half, which reflects the more mechanical attributes of the EX1. In truth, Peugeot introduced similar conceptual architectural layouts in their Asphalt concept from 1996 and the 2006 20Cup Concept.
All of these concepts feature a very narrow rear track, primarily for improved aerodynamics, handling and efficient, minimal packaging. The most significant evolution of this third generation of narrow rear track concepts from Peugeot are is its pair of electric motors, each providing power to either the front or rear wheels.
“The new Peugeot DNA is Motion and Emotion. This is all about efficiency,” explained Gilles Vidal, Peugeot Director of Design. “In the design department at Peugeot, we are pushing towards the reality that ‘electric’ is all about an emotional experience of getting out of the city, and having an exciting time driving”.
The inside tack is that its DRG is a strong hint towards the upcoming 208 supermini’s face. Aside from this, the concept seems to sit slightly ill at ease with Peugeot’s move away from what it describes as a ‘hyper-sporty’ aesthetic. While, after 14 years of similar concepts, there still seems little chance that the company will every commit one to production.
Modification Opel GTC Paris
Modification Opel GTC Paris
Opel is billing this as a concept, yet in really it’s a production car preview of the forthcoming Astra GTC. We can’t help but wonder whether the real intent was to divert attention from archrival Focus, which Ford is presenting at the opposite end of the show hall complex. The previous three-door GTC Astra was a great looking car that disguised its height brilliantly for a five-seat coupĂ© and sold well as a result. The good news is that this successor continues the same formula.
The car has a well-resolved DRG. Although it shares the same hood and headlamp as the five-door Astra, the dark lamp cans provide a more piercing expression and the smaller upper grille is less dominant. The eye is drawn down to the broad lower grille, whose top half is filled with a blacked-out bumper beam and the license plate. Together with the blades on the outer corners and LED running lamps set in the side recesses, the overall visage speaks of strength while avoiding the overt aggression of certain cars at the show. Talking to design director Mark Adams, he explained “This represents one bookend of the new Opel front face, while the Insignia – with its big upper grille, is the other”.Modification Opel GTC Paris
Seen up close in side view, one notices the bone line that extends rearwards from the front door into the rear lamp, with a neat curl around the doorhandle. Meanwhile the signature Opel blade line at the front of the door remains as a subtle motif. The rear three-quarter is easily the car’s best angle, with polished surfacing of the rear spoiler into the tailgate pressing and exhausts neatly integrated in the lower diffuser.
In the interior, the driver’s seat emphasizes red, used as a contrast color against black. The seat itself is worthy of note for the interesting calligraphy etched into the suede-like Dinamica fabric in six languages. There’s also a neat detail in the use of new square baseball stitching on seats and doors.
Modification Buick Regal GS 2012
It’s here. Buick enthusiasts have been brimming with anticipation for the return of an iconic performance moniker. We’ve seen plenty of the new Regal, but here’s our first official look at the high-performance-themed 2012 Buick Regal GS.

As expected, the car’s European roots and Opel handprint are unmistakable on the visual side. The Regal GS shares many styling similarities with the Insignia OPC, including the satin-metallic, vertical air intake ducts prominently forged to the front fascia. A unique front grille sits between the bi-xenon HID headlights, while trapezoidal exhaust outlets give the rear a more striking look. An integrated rear spoiler and rocker panel extensions build up the theme of aggression. But we’d be remiss to call the Buick an Opel clone, as this Regal comes solely with front-wheel drive and four cylinders beneath the hood.

The engine pressed into service was never a secret. Regal GS drivers will be treated to a version of GM’s direct-injected and turbocharged 2.0-liter Ecotec inline-four used in the Regal CXL Turbo, only with more power. Buick’s tuning team fitted a 3-inch-diameter exhaust system and encouraged the intercooled, twin-scroll turbocharger to compress even greater amounts of air for a more fiery combustion. The gain in performance numbers is obvious on paper: The CXL Turbo is rated at 220 horsepower and 258 pound-feet of torque; the GS version puts out 255 horsepower and 295 pound-feet.

As Buick’s gift to the enthusiast, a six-speed manual comes standard and helps propel the Regal GS from 0-60 mph in under 7 seconds (the CXL Turbo we just tested takes 7.5 seconds to get there). Despite its estimated 3710-pound curb weight, fuel economy isn’t affected at 19 city/29 highway mpg, which is 1 mpg better in the city than the weaker CXL Turbo. The Regal GS will be offered with a six-speed automatic with Driver Shift Control at a later date, and that transmission will be sufficient for 18 city/28 highway mpg.

With fuel efficiency numbers pleasing enough for the CAFE bean counters, let’s dive into the components. The target Regal customers (re: young) who are thrilled to row their own gears will no doubt also appreciate the lowered ride height, Brembo front four-pot brake calipers, real-time Computer Damping Control, and Interactive Drive Control System (IDCS).
Modification Buick Regal GS 2012
As expected, the car’s European roots and Opel handprint are unmistakable on the visual side. The Regal GS shares many styling similarities with the Insignia OPC, including the satin-metallic, vertical air intake ducts prominently forged to the front fascia. A unique front grille sits between the bi-xenon HID headlights, while trapezoidal exhaust outlets give the rear a more striking look. An integrated rear spoiler and rocker panel extensions build up the theme of aggression. But we’d be remiss to call the Buick an Opel clone, as this Regal comes solely with front-wheel drive and four cylinders beneath the hood.
Modification Buick Regal GS 2012
The engine pressed into service was never a secret. Regal GS drivers will be treated to a version of GM’s direct-injected and turbocharged 2.0-liter Ecotec inline-four used in the Regal CXL Turbo, only with more power. Buick’s tuning team fitted a 3-inch-diameter exhaust system and encouraged the intercooled, twin-scroll turbocharger to compress even greater amounts of air for a more fiery combustion. The gain in performance numbers is obvious on paper: The CXL Turbo is rated at 220 horsepower and 258 pound-feet of torque; the GS version puts out 255 horsepower and 295 pound-feet.
Modification Buick Regal GS 2012
As Buick’s gift to the enthusiast, a six-speed manual comes standard and helps propel the Regal GS from 0-60 mph in under 7 seconds (the CXL Turbo we just tested takes 7.5 seconds to get there). Despite its estimated 3710-pound curb weight, fuel economy isn’t affected at 19 city/29 highway mpg, which is 1 mpg better in the city than the weaker CXL Turbo. The Regal GS will be offered with a six-speed automatic with Driver Shift Control at a later date, and that transmission will be sufficient for 18 city/28 highway mpg.
Modification Buick Regal GS 2012
With fuel efficiency numbers pleasing enough for the CAFE bean counters, let’s dive into the components. The target Regal customers (re: young) who are thrilled to row their own gears will no doubt also appreciate the lowered ride height, Brembo front four-pot brake calipers, real-time Computer Damping Control, and Interactive Drive Control System (IDCS).
Subscribe to:
Posts (Atom)



